Phillips
Pro Audio is in the business of design, installation and service of
professional audio, lighting and video systems for churches , schools
, and commercial facilities. The owner Dennis Phillips has a long
back ground in these fields, Mr. Phillips worked as a touring concert
sound engineer and technical director on numerous world class tours
and has produced thousands of CD projects for musical groups. Known
as a leader in the consulting and installation sound/lighting/ and
video business , Mr. Phillips would like to share his experience with
you.
A
Note from the Owner:
Thank you so much for taking the time to visit our web site and on
line catalog. Please feel free to contact us via E-mail, or by using
the good old fashion telephone. I would like to hear any comments
you may have about our site and our service.
Thanks again for
all of your support.
Dennis Phillips
(888) 683-0064
info@phillipsproaudio.com
There
are many ways for us to serve you.
You
may have us be the consultant for your project:
You may have us bid and install your project:
You may have us be the consultant and install your project:
Southeast Michigan
provider of sound systems, video sytems, and lighting systems for
schools, churches, and commercial facilities.
Northwest Ohio provider of sound systems, video sytems, and lighting
systems for schools, churches, and commercial facilities.
You may have us be the consultant for your project which
includes:
Description
of Proposal / Confirmation of Contents
1)
Auto Cad /Schematic drawing of Sound System Configuration.
Auto
cad design of sound system configuration signal flow, in respect to
written specification. EASE Cad Sound System Design (Through a program
called EASE we build a 3-D image from your blue prints and are able
to tell you your best choice of speaker and the exact placement including
pitch and yaw .Also obtained from this tool, we are able to foresee
many problems with a facilities room acoustics, allowing you to have
a solution for the problem long before the facility is built.
2)
Auto Cad Panels, Patch bay , Rack elevations-
Auto
Cad work up of all custom panels , engraving , equipment and panel placement/
rack elevations, patch bay layout, conduit riser diagrams, grounding
Scheme, A.C. power .
3)
Cost Estimate Configuration-
Pricing
of entire job for bid purpose / budget / and or projected revenue requirements.
Possible alternate pricing as well.
4)
Clarification / Written Sound System Specification-
| Related
documents- |
Sections
related to electrical requirements |
| Quality
Assurance - |
Requirements
of qualified bidders |
| Submittals- |
Requirements
of awarded bidder |
| Products- |
Description
of Specified Equipment |
| Test
requirements- |
Acceptable
procedures for test and measurements of sound system |
| Execution- |
Proper
code requirements , proper installation techniques |
| Orientation
- |
Proper
training requirements , requirements for completed project |
| Documentation |
Completed
job documentation requirements |
5)
Analysis/Acoustical Testing of Venue .
Complete
testing: reverb time, reflections sound dispersion factors , complete
written report.
6)Commission/
Testing and adjustment of system according per spec.
Final
inspection of sound system
Confirm proper wiring procedures
Acoustical levels
Signal to noise levels
Substantiate programing of DSP equipment
Confirm Equipment List to be consistent with specification
Punch list for Sound system contractor
Sign off on completion of project.
7)
DSP Software Configuration .
Written specification
of use and function . DSP software if required shall be configure and
installed by the sound contractor . Requirements Of sound Contractor
and ability using DSP equipment .
8)
Travel /on Site Visits
On site
visits and travel time
9)
Acoustical Cad Ease Confirmation
Auto Cad Version Ease shall be used for final confirmation of projected
sound system design before specification is released for bid purpose
(Frequency coverage Patterns /speaker selections and placement . etc.)
All
Above included as Specification for fully completed project .
You
may have us bid and install your project.
We would be happy
to bid your project according to architectural blue prints, and written
specifications supplied by a sound consultant.
You
may have us design and build your project.
We use our twenty
years of experience to discuss your needs and offer suggestions to help
you. There are many tools discussed in the consulting section to achieve
guaranteed results . We will supply you with all of your options and
help guide you through this process with ease.
|
About
Phillips Pro Audio
